Mintion - Beagle Camera Tripod Mount *STL File ONLY*

This is a 3D file that you can print on your 3D printer. This is designed to be printed with a 0.4mm nozzle at 0.2mm layer height.

I used PLA but you should be able to use PLA+, ABS, PETG, ASA, Nylon or PC.


Print Settings:
Nozzle - 0.4mm
Layer Height - 0.2mm
Shells - 4
Top/Bottom Layers - 4
Infill - 20%
Supports - None

The threads for this are printed but I suggest running a 1/4 20 screw throw the top and out the bottom side to make sure all the threads are cut right.

Mintion - Beagle Camera Tripod Mount STL File